This is such an underrated channel. Love the music with the sounds of methodical work. It is peaceful just watching. Love the no fuss and no talking. Just beautiful bikes and giving them the love they deserve. More like this please.
My young grandkids watch foolish RUclips videos of toys being opened, says I, “What a waste of time!” However, just for the calming effect alone, I could watch this over and over. Strange.
Beautiful bike, I have to say I really enjoy watching you work, the music that you use is really nice too. Thank you very much for putting in the effort to bring this kind of content.
Wonderful video, and your 9T is breathtaking! I had to pause the video and just take in all the details of the bike for a few minutes. Getting ready to install a full exhaust on mine. This video was great inspiration.
an Inspiration to watch. I have had a love affair with motorcycles most of my life. I have worked in tech most of my life and I have provided for my family. my children are now fully grown. I want to go back to college and learn how to be a mechanic and to learn fabrication and welding so badly. I have watched your videos with relish. thanks love the music too
Magnifico video como siempre. Tan solo un apunte, esta vez el escape no lo has hecho tu, es un after market, nos tienes muy mal acostumbrados, ers un artesano unico.
Your take on the modern classic,, power style and not deafening turns heads for the right reasons,, pipes are great,, bet when blued up totally awesome thanks ☘️☘️☘️☘️☘️☘️from Northern Ireland 👍👍👍👍
Hi there! I love your videos, I suggest you to use a 21:9 aspect ratio instead of black bars since in an ultrawide screen black bars are seen all around the video. Thanks!
Beautiful video again from 46 works. But I couldn't help but notice the complete lack of weld/penetration inside the Y of the collector...This would have been an instant fail in some of the places I have worked and would never have got past QC.
@@shiroh73 Yes I understand but there is no penetration through to the outside. Are you familiar with making a purge box? I will look through some of my photographs and connect with you through instagram. I hope it's helpful for you. Thank you for your brilliant channel.
Awesome craftsmanship, thank you for sharing. May I ask, what are the springs for on a Ti pipe, which is not found on the welded stock exhaust? (for vibration perhaps?) ✌️
Absolutely beautiful. Sorry for my ignorance but is that a spark plug connected to the exhaust pipe? If so, what is it for? Can someone please explain?
I have a 2009 BMW R 1200 R and I would love to have a 46Works exhaust system on it. Impecable craftsmanship, the muffler alone is something to behold and I can see real horsepower gains to be had. Respect, Sir!
good morning from Argentina. excellent work and dedication. I've been watching your videos on two cylinder bicycles with opposite cylinders (like the BMW R nine T). The truth is that here they are very difficult to find and also too expensive for my pocket. I was wondering if there is the possibility of making a motorcycle of these characteristics with a decarlo bmw engine 600cc or 700cc. Please tell me what you think.
Thank you for watching. I'm not sure because I haven't seen decarlo bmw engine.However, I saw at the pictures of the engine, you may be able to combine it with the BMW motorcycle transmission.
yup, some people in my country using car engine and put motorcycle gearbox on it, but the down side is the overall bike is going to be too long, and if u looking for engine mods reference, u can search psyco engine indonesia, they've make boxer engine out of a single cylinder honda gl 200r / tiger, then even make a radial 5 engine, and I'm not belittling 46 works by any means, I straightly fall in love to the way they styling the old boxer racer when I see it 1st time on bikeexif
Hello from the Philippines! I really appreciate your work and craftsmanship. Beautiful builds! I hope someday you can feature a Triumph build. I have a Thruxton that I am planning to keep until I'm old. Would be nice if I could put some of your parts on my bike. Cheers!
So, you removed a perfectly good factory exhaust system and bought another one? 🤦🏼♂️ makes no sense. Why waste your money on something that already works?
Haha! This is the original exhaust system I made. The weight is 7kg lighter than the genuine product. It has a sharp engine and a good sound.I think you should use the genuine one.
![[#15]M's MotoGuzzi custom 最終回 Final episode](/img/1.gif)
This is such an underrated channel. Love the music with the sounds of methodical work. It is peaceful just watching. Love the no fuss and no talking. Just beautiful bikes and giving them the love they deserve. More like this please.
Thank you!!
I was just thinking the same. :)
マテリアルの質感・形状・所作に景色そしてサウンド・・・すべてが美しく、ヒーリングビデオの様な心地よさを感じてしまいました。いつも素敵な映像ありがとうございます。
hrysmt 本当にスペックだけでなく、造形美にも拘って制作されているのがひしひしと伝わってきます。
いつかはオーダーしてみたいビルダーさんです。
ありがとうございます、またぜひご覧ください！
お待ちしております！
I don't know why, I like how Japanese people works and the quality of the final product. OmG
the production quality is just brilliant!!
Thanks!!
The craftmanship, materials, recordings etc. This is art.
RnineT custom projectの時に衝撃を受けて以来のファンです。６台の中で一番好きでした。現状の自分には製作依頼は難しいですが、これからも動画楽しみにしています。これからもカッコいいbikeを作り続けて下さい。
ありがとうございます。今年は車両製作と合わせて動画も随時アップしますのでぜひお楽しみに！
My young grandkids watch foolish RUclips videos of toys being opened, says I, “What a waste of time!” However, just for the calming effect alone, I could watch this over and over. Strange.
This man is dedicated to cafe motorcycles, love the bikes love the builds.
Beautiful bike, I have to say I really enjoy watching you work, the music that you use is really nice too. Thank you very much for putting in the effort to bring this kind of content.
Wonderful video, and your 9T is breathtaking! I had to pause the video and just take in all the details of the bike for a few minutes. Getting ready to install a full exhaust on mine. This video was great inspiration.
Thank you so much!
an Inspiration to watch. I have had a love affair with motorcycles most of my life. I have worked in tech most of my life and I have provided for my family. my children are now fully grown. I want to go back to college and learn how to be a mechanic and to learn fabrication and welding so badly. I have watched your videos with relish. thanks love the music too
Amazing - i love these films and beautiful Motorcycles.
Greetings from Munich Bavaria!
Now this is what's called craftsmanship
Damn what great workmanship on the titanium exhaust. Very smooth curves and great welds!!! A very very impressive build and music too
Magnifico video como siempre. Tan solo un apunte, esta vez el escape no lo has hecho tu, es un after market, nos tienes muy mal acostumbrados, ers un artesano unico.
Your take on the modern classic,, power style and not deafening turns heads for the right reasons,, pipes are great,, bet when blued up totally awesome thanks ☘️☘️☘️☘️☘️☘️from Northern Ireland 👍👍👍👍
Hi there! I love your videos, I suggest you to use a 21:9 aspect ratio instead of black bars since in an ultrawide screen black bars are seen all around the video. Thanks!
keep up the spirit for your career in the automotive field.... greetings from Indonesia..
Great enjoyment from watching you guys videos, would love to see more.
Thank you!
Beautiful video again from 46 works. But I couldn't help but notice the complete lack of weld/penetration inside the Y of the collector...This would have been an instant fail in some of the places I have worked and would never have got past QC.
I weld the Y-shaped part from the inside.
@@shiroh73 Yes I understand but there is no penetration through to the outside. Are you familiar with making a purge box? I will look through some of my photographs and connect with you through instagram. I hope it's helpful for you. Thank you for your brilliant channel.
9:32 beautiful shot. Nice job
I would have loved more glimpse of the ride. 😎
THIS IS PURE PASSION!
👍
in 0:43 u removed something...... Is it a exhaust gas temperature measuring unit????
I love your passion and accuracy
Great job great bike 🏍
your work its just breathtaking...You are a pearl in the ocean...
Thank you!!
Another masterpiece .
Screen door springs? Way cool!
Awesome craftsmanship, thank you for sharing.
May I ask, what are the springs for on a Ti pipe, which is not found on the welded stock exhaust?
(for vibration perhaps?) ✌️
Thank you very much. The springs are for fixing. The stock is band fixed, but this is spring fixed.
46works I understand.
Thank you from Manila ✌️
Oh my goodness why am I only discovering this channel now!!! Can’t like this enough...
Qué delicadeza y mimo. Es hipnótico. Bravo.
Отдельное спасибо за хорошую музыку !
Absolutely beautiful. Sorry for my ignorance but is that a spark plug connected to the exhaust pipe? If so, what is it for? Can someone please explain?
Thank you! It is an O2 sensor. Modern bikes are all equipped.
I have a 2009 BMW R 1200 R and I would love to have a 46Works exhaust system on it. Impecable craftsmanship, the muffler alone is something to behold and I can see real horsepower gains to be had. Respect, Sir!
Thank you!
Nice workmanship. Are there no new gaskets required at the cylinder head joints or an ECU remap after fitting the exhaust?
We haven't filmed the video, but use a new gasket.This exhaust is designed so that good performance can be achieved without remapping the ECU.
Is the pipe pure titanium or an alloy?
かっこえええええええええええ！！！！
こちら純正時についている排気デバイスはどうしているのでしょうか。エラーが出ない方法があれば教えていただきたいです。
エギゾースト側じゃない車体の方にワイヤが繋がってる黒いボックスみたいなのがあるからそれをネジ外して分解してみてください。
中に引っ掛けてるワイヤー外せば簡単に取れます。
ワイヤーはずすだけだからcpuでエラーとか吐きません。
So wonderful job, 👏👏👏👏👏 from Algeria 🇩🇿🇩🇿🇩🇿
Thank you!
Would have loved to see a short megaphone silencer, as opposed to a super bike style end can. Fantastic engineering. 👍🇬🇧
Thanks!
Could you please list what music you used for the video? Really nice music! Great vid...just subscribed too!
Thank you very much. They are copyright-free music.
Sounds great & has that 46works style
Thanks!
such beautiful pipework! keep up the good work man! btw, who makes your riding boots and jeans? looks very sharp!
Thank you. It's Levi's and Red Wing.
good morning from Argentina. excellent work and dedication. I've been watching your videos on two cylinder bicycles with opposite cylinders (like the BMW R nine T). The truth is that here they are very difficult to find and also too expensive for my pocket. I was wondering if there is the possibility of making a motorcycle of these characteristics with a decarlo bmw engine 600cc or 700cc. Please tell me what you think.
Thank you for watching. I'm not sure because I haven't seen decarlo bmw engine.However, I saw at the pictures of the engine, you may be able to combine it with the BMW motorcycle transmission.
yup, some people in my country using car engine and put motorcycle gearbox on it, but the down side is the overall bike is going to be too long, and if u looking for engine mods reference, u can search psyco engine indonesia, they've make boxer engine out of a single cylinder honda gl 200r / tiger, then even make a radial 5 engine, and I'm not belittling 46 works by any means, I straightly fall in love to the way they styling the old boxer racer when I see it 1st time on bikeexif
So satisfying
Hello from the Philippines! I really appreciate your work and craftsmanship. Beautiful builds! I hope someday you can feature a Triumph build. I have a Thruxton that I am planning to keep until I'm old. Would be nice if I could put some of your parts on my bike. Cheers!
Thank you! I wish I had that opportunity.
SPETTACOLARE !!!!! SEI UN GRANDE TOP TOP TOP TOP !!!!!!!!!
Grazie!
Sei un grande, fai sembrare tutto facile
J’adore vos vidéos la classe 👍👍
Very calming and enjoyable
Would it work to convert a modern fuel injection bike to carbureted? 現代の燃料噴射自転車をキャブレターに変換することはできますか？
It is technically possible.
it's very satisfying
Why he make this look so easy
素晴らしい。
ありがとうございます！
Beautiful. ♥️😎👌
👍
👏👏👏
love it
당신의 제자가 되고 싶군요...
선생님...
Beautiful. Amen.
I quit biking in 1987 due to pressure from my bride. I am rid of her but have not yet returned to my roots. Soon...
Dat word dan hoog tijd...
Do you sell these exhaust systems?
Yes! motosaga.site/titanium-full-exhaust/
For what are these springs on the exhoust?
They are for fixing.
SALUDOS DESDE CIUDAD DE MÉXICO 👍🏻
👍🏻
Beautiful
Nick Australia
Kualitas produk bagus bgt, kualitas suara : BEAT MBEEERRRRR!.
Cool !
👍
I really admire you and I want to follow you to learn
Wouaouw !!
what song is it ？
They are copyright-free music.
I want to ship my R80 to you
Thanks!
Made by Germans, improvised by Japanese. Perfection
工場見学したい❗
いずれワークショップ的な事とかやってみたいですね！
@@shiroh73 さん
返信ありがとうございます。近くに住んでるのですが、雑誌で見る流麗なマシン造りには敬服の至りです。
コーヒータイム♪
Dzieło sztuki
So, you removed a perfectly good factory exhaust system and bought another one? 🤦🏼♂️ makes no sense. Why waste your money on something that already works?
Haha! This is the original exhaust system I made. The weight is 7kg lighter than the genuine product. It has a sharp engine and a good sound.I think you should use the genuine one.
I stand corrected, my apologies Dear Sir.
Đỉnh cao
Sounds like it's too restrictive
良いバイクに良いマフラーです
引き伸ばしスプリングを取り付ける際。✋手を添えるのは❗御法度です外れた際に😅手に刺さります☺
Love u
Great job, nice motorcycles!!! but it sounds like an old man farting
Listening to a cheap speaker sounds like an old man's fart haha!
46works holy fart you just killed him😂😂💀
👏👏👏👏🇮🇶
Geil
あなたの仕事は何ですか?
私もあなたのような仕事がしたいです。
ちょっと恥ずかしながら年間収入も知りたいです。
この仕事を別に学んだことがありますか。
-by translator
コメントありがとうございます。概要欄にプロフィールがありますので、そちらをご覧ください。ruclips.net/user/shiroh73about?view_as=subscriber
すごい方を知らないうちに、コメントで失礼しました。 映像楽しみです。
This exhaust is so ugly, the stock one is so better 🤮🤮🤮🤮🤮
I like both.
The beauty depends on the eyes of the looking person
I don’t like them too but it is very well made and the sound of it is great
え、それだけ？！